Multifunctional device for inhalation anesthesia for adults and children (MAIA-01)
It is designed for inhalation anesthesia in surgical procedures with the provision of artificial ventilation and monitoring of various parameters.
№ | Name | Amount, pcs. | |
1. | Multifunctional inhalation anesthesia device for adults and children “MAIA-01” (with patient’s parameters monitor) | 1 | |
1.1 | Evaporator (sevofluarane) | 1 | |
1.2 | Evaporator (isoflurane) | 1 | |
1.3 | Patient’s parameters monitor, including analysis unit and display | 1 | |
1.4 | Bracket | 1 | |
1.5 | Y-adapter | 1 | |
1.6 | Circuit Ø22 mm/22F, 60cm | 2 | |
1.7 | Circuit Ø22 mm/22F, 100cm | 3 | |
1.8 | Bracket (breathing hoses) | 1 | |
1.9 | Moisture accumulator | 1 | |
1.10 | Hose (О2, L=5m) | 1 | |
1.11 | Breathing bag, reserve, 3 l. | 1 | |
1.12 | Straight adapter 22М/22М | 1 | |
1.13 | Oxygen sensor | 1 | |
1.14 | Flow-rate transducers unit | 1 | |
1.15 | Filter | 1 | |
1.16 | Mains cable | 1 | |
2. | Accessories: | ||
2.1 | Circuit REF | 4 | |
2.2 | Hose (N2O, L= 5m) | 1 | |
2.3 | Hose (air, L= 5m) | 1 | |
2.4 | Hose (Хе, L= 2m) | 1 | |
2.5 | Adapter connector (О2) | 1 | |
2.6 | Adapter connector (N2O) | 1 | |
2.7 | Adapter connector (Хе) | 1 | |
2.8 | Y-adapter | 1 | |
2.9 | Straight adapter 22/22 mm | 2 | |
2.10 | Breathing bag, reserve (control) for 0,5 l. | 1 | |
2.11 | Limb (for sevoflurane) | 1 | |
2.12 | Gas sensor with plug and connector | 1 | |
2.13 | Tube (gas discharge) | 1 | |
2.14 | ECG channel cable, five-wires | 1 | |
2.15 | ECG – disposable electrode, for adults | 30 | |
2.16 | ECG – disposable electrode for children | 30 | |
2.17 | Cup | For adults | 1 |
For children | 1 | ||
2.18 | Pneumatic tube | 1 | |
2.19 | Pulse-oxymetric sensor | For adults | 1 |
For children | 1 | ||
2.20 | Cutaneous temperature sensor | 1 | |
2.21 | Rectal temperature sensor | 1 | |
3. | Spare parts: | ||
3.1 | Ring | 3 | |
3.2 | Membrane | 2 | |
3.3 | Disk (mica) | 2 | |
3.4 | Breathing bag, reserve, 3 l. | 1 | |
3.5 | Moisture separator | 5 | |
3.6 | Filter | 2 | |
3.7 | Filter (for oxygen sensor, Ø13 mm) | 5 | |
4 | Documents |
The sensor is intended for continuous non invasive functional monitoring of arteries saturation with oxygen (SpO2) and patients’ pulse rate when used together with compatible patient’s monitor or pulseoximetry device.
Anesthetics |
|
Ventilation Modes | Controlled
Spontaneous breathing (Spont) Manual ventilation (Manual) |
Parameters on the integrated monitor screen |
|
Parameters on the patient parameter monitor screen (optional) |
|